1-3. A & D BOARD REMOVAL
3
1
Remove (1) screw (+BVTP 3 x 8) from the cable holder
at the rear of the chassis base to release the cable.
Remove (2) screws (+BVTP 3 x 8) from the rear of the D
2
Board and remove the rear of the chassis base.
3
Remove remaining (7) screws (+BVTP 3 x 8) from the D
Board. Lift the board up and out to remove.
Remove the shield cover from the A board.
4
Gently wiggle the A board back and forth, and pull it to
5
remove.
1
2
— 8 —
HMD-A240
5
4