Cooling System - Chevrolet Fleetmaster Series 1947 Owner's Manual

the body. Reassemble the cover, making sure that the gasket is
clean and
in
good condition over its entire surface, so that a
tight seat is obtained. Put on wing nut.
Reassemble the cleaner to the carburetor. The cleaner must
be put on tight and set down so that the felt pad rests against
the carburetor to assure a good seat. Tighten clamp.
The periods at which this procedure must be followed will
vary greatly according to the particular conditions under which
the car is operating. Experience will tell what this period may be.
COOLING SYSTEM
The function of the cooling system is to keep the engme
at its most efficient operating temperature under all driving
conditions.
Chevrolet's cooling system is unusually effective, because
Chevrolet's engine design provides large water passages around
Fig. 30- Water Flow Through Engine
tweniy-.reven