Glass Media - Napoleon B81NG Installation And Operating Instructions Manual

C. Align the 4 tabs on the porcelain base
down to line up with the holes in the burner
tray. Secure using the screws provided.
2.6

GLASS MEDIA

CLEAN THE GLASS MEDIA PRIOR TO INSTALLATION. BEFORE APPLYING THE CLEANED GLASS, ENSURE
DO NOT CHANGE OR SUBSTITUTE THE GLASS MEDIA MATERIAL PROVIDED WITH THIS APPLIANCE. IF
REPLACING, USE ONLY THE REPLACEMENT GLASS MEDIA AVAILABLE FROM YOUR AUTHORIZED
GLASS MEDIA OVER THE BURNER MUST NOT BE MORE THAN ONE LAYER HIGH. MORE THAN ONE LAYER
Evenly spread the glass media onto the media tray, covering the burner tube and following the natural shape of
the tray.
NOTE: The distribution of glass media over the burner tube will infl uence the fl ame height. When the
fl ames impinge on the glass, the glass may discolour slightly and the edges may soften.
CLEANING GLASS MEDIA
Glass media may have a fi ne oil residue that needs to be cleaned prior to installation. Clean the glass with mild
dish soap, drain, rinse thoroughly and dry before placing over the burner.
OVER THE BURNER WILL CAUSE FLAME LIFTING AND SOOTING PROBLEMS.
2
Bend
Tabs
WARNING
!
THAT IT IS DRY.
DEALER / DISTRIBUTOR.
2
74.1
Pilot
Assembly
W415-0712 / A / 11.09.10
5