Motorola AP-51 Series Product Reference Manual page 221

2. Within the WIPS Status
radio is servicing its coverage area as a typical access point or as a WIPS sensor.
Selecting the WLAN
WIPS checkbox defines the radio as a WIPS sensor.
3. Define a primary and alternate WIPS server IP Address within the
WIPS Server 2 fields.
This is the address of the WIPS console server.
4. Click Apply to save any changes to the WIPS screen. Navigating away from the screen
without clicking Apply results in all changes to the screens being lost.
5. Click Undo Changes
settings displayed on the WIPS screen to the last saved configuration.
6. Click Logout to securely exit the access point applet. A prompt displays confirming the
logout before the applet is closed.
field, define whether the access point's 802.11a or 802.11b/g
checkbox defines the radio as a typical access point. Selecting the
(if necessary) to undo any changes made. Undo Changes reverts the
Network Management
WIPS Server 1 and
5-67