First Step - Kenwood DNR935WBT Quick Start Manual

First Step

Power on the unit and perform some setup steps
before using.
1
Press the <8HOME> button.
The unit is turned on.
⿠To turn off the unit:
Press the <8HOME> button for 1 second.
✎
NOTE
• "Initial setup" also appears when the unit is reset.
2
Touch the corresponding key and set the
item.
Language Setup
Select the language used for the GUI and input
methods. Default is "English (United States)".
1) Touch [Language Setup].
2) Select a language from the list.
6
ñ English
Wifi Setup
Configure settings for connection to Wi-Fi.
1) Touch [Wifi Setup].
2) Slide Wi-Fi to ON.
3) Select the Wi-Fi access point to register from
the list.
4) Enter the Password.
5) Touch [Connect].
After setting, press the < 6 > button.
Date Setup
Set the date and time.
1) Touch [Date Setup].
2) Touch [Select time zone].
3) Select a time zone.
After setting, press the < 6 > button.
Account Setup
Set the information about the user of this unit.
1) Touch [Account Setup].
See Types of accounts, Create User Account and
Set Owner Account.
⿠Types of accounts
Administrator
As Administrator, you can create an owner account
and perform initial setup.
You can log in to the system if you have not created
an owner account.
Guest
An account for guests such as your friends.
The guest can operate this unit, but cannot use the
functions related to mail, social media, and Route
Collector site.
Owner
The account for the person who manages this unit.
The owner can use the functions related to mail,
social media, and Route Collector site.
You can register users such as your family.
User
The account for the user of this unit.
The user can use the functions related to mail, social
media, and Route Collector site.
You can register up to 4 user accounts.
⿠Create User Account
✎
Preparation
• To register yourself in the Route Collector site as a
user, you need a mail address.