Reset, 24Hr Or Am/Pm Display,Setting Time; Before You Start; Setting The Correct Time And Day - Danfoss FP715 Installation & User's Instructions

Before you start

Open the fl ap on the front of the clock. Press the RESET
button using a non-metallic object (e.g. pencil/matchstick)
until you hear a click and the 2 red lights on the front of the
unit fl ash once.
This will reinstate the preset
programmes and set the time to
12.00pm on Monday (MO)
Choice of 24hr or AM/PM display
Press and hold DAY & NEXT
ON/OFF for 1.5 seconds to toggle
between 24hr clock and AM/PM
display, as required.

Setting the correct Time and Day

SETTING THE TIME
Press PROG once.
The words SET TIME will appear
at the top of the display & the time
will fl ash on and off.
Use the + and - buttons to set
the correct time (press and hold to
change in 10 min increments).
15