Dirt Devil Evo Operating Manual page 25

1 Overview
1.2 Lights and illuminated buttons
2
On/off button
on sweeping
robot
'Dusting'
button
'Washing'
button
Status LEDs no LED on
LED on the
control cube
continuous blue light
flashes red
continuous red light
continuous blue light
continuous blue light
an LED is flashing blue
continuous blue light is
coming from one to three
LEDs
all three LEDs flash one
after another
all three LEDs flash one
after another periodically
a continuous red light is
coming from the middle
LED
is flashing blue
continuous blue light
continuous red light
the sweeping robot is on
the battery is running low
the batteries have to be charged
the 'dusting' mode was selected after the
sweeping robot was switched on
the 'washing' mode was selected after the
sweeping robot was switched on
the sweeping robot is off or has no connection to
the control cube
after switching on, it established a connection to
the control cube
after selecting the desired mode, one, two or
three LEDs emit light, depending on the strength
of the signal received from the control cube
(the signal is strongest if three LEDs are on)
the sweeping robot is computing information
the sweeping robot is in sleep mode
the appliance has a fault,
shooting"
the control cube is switched on and is broad-
casting a signal
the control cube is switched on and is receiving
a signal from the sweeping robot
the batteries have to be changed
Page 38, "Trouble-
25