Securing Your Child; Adjusting The Harness Straps - Britax B-SAFE User Manual

Securing Your Child

• Adjust harness to fit clothes the child is wearing.
Remove bulky coats and/or jackets before putting
child in infant car seat.
• Adjust the belts provided with this child seat so they
fit snugly around your child. A snug strap should
not allow any slack. It lies in a relatively straight line
without sagging. It does not press on the child's flesh
or push the child's body into an unnatural position.
• Verify that the infant car seat is secure and that the
harness is properly adjusted around the child EACH
time the infant car seat is used. Failure to properly
adjust the harness could result in death or serious
injury.
• The harness straps should be located at the harness
height position at or below the child's shoulders.

Adjusting the Harness Straps

• Loosen the infant car seat
harness by pressing the
harness adjuster release
button and pulling both
harness straps forward.
• Locate the harness yoke on
the back of the infant car seat.
28