Lap-Shoulder Belt Installation - Britax B-SAFE User Manual

Installing with Base

Lap-Shoulder Belt Installation

• Only raise the base as described in these instructions.
Do not use anything to raise the base of the infant car
seat off the front edge of the vehicle seat. In a crash,
this could cause the infant car seat not to perform as
intended.
• For lap-shoulder belt installation, the base must be
secured in the vehicle before attaching the occupied
infant car seat.
• Use either the LCS or a vehicle belt method to install
this child seat. Using both is not approved and may
cause the child seat not to perform as intended..
• Place the base in the desired
location on the vehicle seat
and open the upper and lower
portions of the lock-off.
• Pull the vehicle seat belt out.
• Ensure that the vehicle seat
belt is not twisted and then
route the vehicle belt under
and through the first belt
guide, through the open
lock-off and down through the
second belt guide.
• Buckle the vehicle seat belt.
16