Osd Menu; Picture Menu - ProScan PLDED3257A-B Operating Instructions Manual

OSD Menu

1. Picture menu

Description
Picture Settings:
Tint: Control the fresh tones to make them appear natural when analog TV or NTSC - system.
Sharpness: Set the amount of fine detail in the picture.
Screen Size: Select the display aspect ratio till the picture is fit onto the screen. The options
are different according to different input source.
PC Settings: If the video input signal comes from your PC, you may adjust the Vertical Position,
Horizontal Position, Clock, Phase or even perform an Auto adjustment.
Color Temp: Select the color temperature between Normal, Cool and Warm. That your feel
comfortable.
Press button to enter the Picture Settings menu.
OSD Menu
Picture mode: Select between Dynamic, Standard,
Movie, and User .
You may select the picture mode directly by pressing
the PMODE button on the remote control.
When picture mode is set to user,the following setting
can be mannally adjusted.
Brightness: Adjust brightness of the picture.
Contrast: Control the difference between the bright and
dark regions of the screen picture.
Color: Adjust color of the picture.
Auto Adjust: Press ENTER button to automatically adjust
Clock, Phase, H-Position and V-Position settings. In order
to get a good result, you should open a "filling the screen"
picture before executing.
Clock: Adjust the pixel clock frequency.
H/V Position: Adjust the transverse/vertical position of
the screen.
Phase: Adjust the phase of the ADC sampling clock
relative to the sync signal, until a stable image is obtained.
Reset: Press ENTER button to reset the settings.
12