Cadillac CTS 2005 Owner's Manual page 77

Acknowledge/OK: This command instructs the system
to clear a Driver Information Center (DIC) warning
message from the screen when displayed. See "DIC
Warnings and Messages" in Section 3 of your vehicle's
owner manual for more information.
Radio: This command instructs the system to display
the Radio screen. Once the screen is displayed, you can
use other radio commands. See "Radio Commands"
later in this section for more information.
Audio Mode: This command instructs the system to
display the Audio screen. See "Setting the Tone" under
Navigation Audio System on page 3-2 for more
information.
CD Player: This command instructs the system to
display the CD player screen. Once the screen is
displayed, you can use other CD player commands.
See "CD Commands" later in this section for more
information.
CD Changer: This command instructs the system to
display the CD changer screen. Once the screen
is displayed, you can use other CD changer commands.
See "CD Commands" listed later in this section for
more information.
DVD: This command instructs the system to display
the DVD player screen. Once the screen is displayed,
you can use other DVD commands. See "DVD
Commands" later in this section for more information.
Navigation: This command instructs the system
to display the navigation startup screen. This screen will
only be displayed the first time navigation is accessed.
Once the navigation system is active, you can use other
navigation commands. See "Navigation Commands"
later in this section for more information.
Setup: This command instructs the system to display
the Setup menu. See Setup Menu on page 2-7.
Main Menu: This command instructs the system to
display the Main Menu screen. Once the screen
is displayed, you can use other Main Menu commands.
Information: This command instructs the system to
display the Vehicle Information menu. See Driver
Information Center (DIC) on page 5-15 for more
information.
Voice Memo: This command instructs the system to
display the Voice Memo screen. Once the screen
is displayed, you can use other Voice Memo commands.
See "Voice Memo Commands" later in this section for
more information.
4-3