Advertisement
The printer driver installation was aborted.
Cause:
(1) The item Don't install this driver
software was selected in the Windows
Security Window during the setup.
(2) The Cancel button was selected while the
Add Printer Wizard was in progress.
Measure: Run the FUJITSU DL Series Software Setup or
FUJITSU DL Series Printer Driver Package
program again.
Installation was executed in an operating system
Cause:
other than Windows 7 or Windows Server 2008
R2.
Measure: Run the FUJITSU DL Series Software Setup or
FUJITSU DL Series Printer Driver Package in
Windows 7 or Windows Server 2008 R2.
The folder path exceeds the specified number of
Cause:
characters.
Measure: Move the folder path of the Fujitsu DL Series
Printer Driver Package program to the place where
the number of characters is 100 or less.
The setup information file required for the
Cause:
installation cannot be found.
(1) The setup information file may not be
present.
(2) The setup information file may be destroyed.
Measure: (1) Run the Fujitsu DL Series Printer Driver
Package program again.
(2) Obtain the latest printer driver from Support
& Downloads of the Fujitsu Isotec web site.
http://jp.fujitsu.com/group/fit/en/
** The above address was the URL at the
time when this manual was written.
Copyright © 2010 FUJITSU ISOTEC LIMITED
22 / 24
All rights reserved.
Advertisement
