Fujitsu DL Series Driver Installation page 13

4. The Add Printer Wizard is displayed. Select Add a
local printer.
Note:
In Windows Server 2008 R2, the following
window is displayed.
Select Add a local or network printer as an
administrator.
This window is not displayed when you log in
using built-in administrator account.
5. Specify a port to connect the printer to and click the
Next button.
Note:
If a port is not available, for example, in a case
where a port to connect the printer is not present
in the list of Use an existing port, select a
temporary port such as LPT1:(Printer Port)
instead.
6. The window of Install the printer driver is displayed.
Click Have Disk.
Copyright © 2010 FUJITSU ISOTEC LIMITED
13 / 24
All rights reserved.