Advertisement
TROUBLE
SHOOTING
When the printer is connected to
the PC before the printer driver is
installed
When the printer is connected to the PC before the printer
driver is installed, the message, Device driver software was
not successfully installed is displayed on the notification
area (on the right bottom of the window).
In this case, follow the below procedure.
In this section, Windows 7 Professional Windows (when
Fujitsu DL7600 is installed) is provided as an example.
When using another printer, change it to your current printer
name to follow the procedure.
For Windows Server 2008 R2, use the following procedure to
fix the problem.
Note:
If you click the balloon, the following window will be
displayed. After checking the instructions, click the
Close button
.
- Parallel interface
- USB interface
Copyright © 2010 FUJITSU ISOTEC LIMITED
17 / 24
All rights reserved.
Advertisement
