Adjusting The Feed Dog; Checking The Filling Level Of The Bobbin Thread; Needle And Stitch Plate; Adjusting The Needle Position Up/Down - Bernina 740 Manual

Preparation

3.7 Adjusting the feed dog

> Touch the icon «Feed dog up/down»t o raise or lower the feed dog according to the animation.

3.8 Checking the filling level of the bobbin thread

The remaining bobbin thread is indicated on the display.
> Touch the icon «Filling level of bobbin thread» .
> Thread the bobbin thread according to the animation.

3.9 Needle and stitch plate

Adjusting the needle position up/down

> Press the button «Needle up/down» to lower the needle.
> Press the button «Needle up/down» again to raise the needle.

Adjusting the needle position left/right

There is a total of 11 needle positions. The needle position is indicated by the needle position number in the
display.
> Press the button «Needle left» (1) to move the needle to the left.
> Press the button «Needle right» (2) to move the needle to the right.

Needle stop up/down (permanent)

> Touch the icon «Needle stop up/down (permanent)» to fix the needle position permanently.
> Touch the icon «Needle stop up/down (permanent)» again.
36
1
– The machine stops with needle position down as soon as the foot control is released or the button
«Start/Stop» has been pressed.
– The machine stops with needle position up as soon as the foot control is released or the button
«Start/Stop» has been pressed.
036044.50.04_2014-09_Manual_740_EN
2