Table of Contents
Advertisement
CONTROLS AND CONNECTORS
SIGNAL CABLE
Connecting the Signal Cable: Plug one end of the 15-pin signal cable's iinto
the back of the monitor. The other end plugs into the computer's VGA port..
Connecting the Power Cord: Plug the AC-power cord
monitor's AC input socket , the other end to Wall outlet.
Caution: If the AC outlet is not grounded (with three holes), install the proper
grounding adapter (not supplied).
1.
Power input socket
2
Signal input socket
Downloaded from ManualMonitor.com Manuals
Figure 2
Connecting Cables
6
one end to LCD
Advertisement
Table of Contents
