Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Envision H193WK
Summary of Contents for Envision H193WK
-
Page 2: Table Of Contents
TABLE OF CONTENTS FOR YOUR SAFETY -------------------------------------------------- 1 SAFETY PRECAUTIONS -------------------------------------- 2 SPECIAL NOTES ON LCD MONITORS ------------------- 3 BEFORE YOU OPERATE THE MONITOR --------------------- 3 FEATURES -------------------------------------------------------- 3 PACKING LIST --------------------------------------------------- 3 INSTALLATION INSTRUCTIONS --------------------------- 4 CONTROLS AND CONNECTORS -------------------------- 5 ADJUSTING THE VIEWING ANGLE ----------------------- 6 OPERATING INSTRUCTIONS ------------------------------------- 7 GENERAL INSTRUCTIONS ---------------------------------- 7... -
Page 3: For Your Safety
Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. -
Page 4: Safety Precautions
PRECAUTIONS Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monitor. -
Page 5: Special Notes On Lcd Monitors
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. -
Page 6: Installation Instructions
INSTALLATION INSTRUCTIONS SWIVEL BASE Install Figure 1 POWER CORD Power Source: 1. Make sure that the power cord is the correct type required in your area. 2. This LCD monitor has an External universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.) Connect the AC-power cord into your LCD monitor’s External Adapter input socket, and then plug the other end of External adapter to LCD... -
Page 7: Controls And Connectors
C ONTROLS AND CONNECTORS VIDEO CABLE Connecting the D-Sub Cable: Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer’s D-Sub port. Connecting the Power Cord: Plug the AC-power cord into the External Adapter. -
Page 8: Adjusting The Viewing Angle
ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor’s angle. -
Page 9: Operating Instructions
OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. •... - Page 10 FRONT PANEL CONTROL • Power Button: Press this button to switch ON/OFF of monitor’s power. • MENU / ENTER : Activate OSD menu when OSD is OFF or activate/de-activate adjustment function when OSD is ON or Exit OSD menu when in Brightness/ Contrast Adjust OSD status.
-
Page 11: How To Adjust A Setting
HOW TO ADJUST A SETTING 1. Press the MENU-button to activate the OSD window. 2. Press to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate it. If the function selected has a sub-menu, press functions. -
Page 12: Adjusting The Picture
ADJUSTING THE PICTURE The descriptions for function control LEDS Main Main Sub Menu Menu Menu Item Icon Contrast Luminance Brightness Focus Image Setup Clock H. Position Image Position V. Position Warm Cool Color User / Red Temp. User / Green User / Blue Auto Config... - Page 13 Main Main Sub Menu Menu Menu Item Icon H. Position OSD Setup V. Position Timeout Language Language Information Information Reset Exit Menu Item Icon Adjust the horizontal position of the OSD. Adjust the verticalposition of the OSD. Adjust the OSD timeout. Select the language you like.
-
Page 14: Plug And Play
PLUG AND PLAY Plug & Play DDC 2B Feature This monitor is equipped with VESA DDC 2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. -
Page 15: Technical Support(Faq)
TECHNICAL SUPPORT (FAQ) Problem & Question Power LED is not on No Plug & Play Picture is fuzzy Picture bounces or a wave pattern is present in the picture The power LED is ON (orange) but there’s no video or no picture. -
Page 16: Error Message & Possible Solution
ERROR MESSAGE & POSSIBLE SOLUTION CABLE NOT CONNECTED : Check that the signal-cable is properly connected , If the connector is loose, tighten the connector’s screws. Check the signal-cable’s connection pins for damage. INPUT NOT SUPPORT : Your computer has been set to unsuitable display mode ,set the computer to display mode given in the following table.(see page 18) -
Page 17: Appendix
APPENDIX SPECIFICATIONS LCD Panel Input Display Colors Dot Clock Max. Resolution Plug & Play ® EPA E NERGY Input Connector Input Video Signal Maximum Screen Size Power Source Environmental Considerations Dimension Weight (N. W.) Driving system TFT Color LCD Size 48cm(19") Pixel pitch 0.285mm( H ) ×... - Page 18 External Controls: Power Consumption Regulatory Compliance • Switch Auto Adjust Key • Brightness • Contrast • Power Button • MENU • Functions Contrast • Brightness • Focus • Clock • H. Position • V. Position • (Warm)Color • (Cool)Color • RGB Color temperature •...
-
Page 19: Factory Preset Timing Table
Preset Display Modes STANDARD RESOLUTION Dos-mode 720 × 400 640 × 480 640 × 480 800 × 600 SVGA 800 × 600 1024 × 768 1024 × 768 1024 × 768 1280 × 1024 SXGA 1280 × 1024 WXGA 1440 × 900 HORIZONTAL FREQUENCY FREQUENCY... -
Page 20: Connector Pin Assignment
CONNECTOR PIN ASSIGNMENT 15 - Pin Color Display Signal Cable PIN NO. DESCRIPTION Green Blue Ground Ground R-Ground G-Ground B-Ground PIN NO. DESCRIPTION Detect Cable Ground DDC-Serial Data H-Sync V-Sync DDC-Serial Clock...