ViewSonic N2635w User Manual page 41

Using the TV Features
Annotations for OSD Menu Items
See below for meanings of the control items in each menu.
Video menu
Picture Mode: To select picture mode.
Noise Reduction: To reduce the noise level of connected
equipment.
Brightness: To adjust luminance of video.
Contrast: To adjust contrast of video.
Color: To adjust color.
Tint: To adjust tint level.
Sharpness: To adjust picture sharpness.
Back Light: To brighten or darken the backlight.
Color Temperature: To select color temperature.
Auto Adjust: To auto adjust picture's horizontal
enabled in VGA source)
VGA:
source)
H. Position: To adjust the horizontal position of the
picture.
V. Position: To adjust the vertical position of the
picture.
Phase: To adjust delay time of phase in order to
reduce the noise of picture.
Clock: To adjust delay time of clock in order to
reduce the noise of picture.
Balance: To adjust left and right audio balance.
Bass: To adjust bass.
Treble: To adjust the treble.
Surround: To select concert hall effect "On" or "Off".
Reverb: To select the reverb sound effect.
Equalizer: To select equalizer modes.
SPDIF Type: To select audio for SPDIF out.
Auto Volume control: To turn On or Off Auto volume
control.
Audio Only: To turn off the screen picture but keep the
sound on.
TV menu
Tuner Mode: To select TV source. Select "Cable" to
watch cable TV channels, and select "Air" to watch air
TV channels.
Auto Scan: To auto scan TV and DTV channels.
Channel Skip: To skip channels.
MTS: To select audio mode.
Audio Language: To select available audio language.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic 36 N2635w