Installing The Converter; Duplex Mode Support - Planet EM-GT70X User Manual

5. Installing the Converter

Please follow these steps to install the converter:
•
Turn off the power of the device/station in a network to
which the GT-70X will be attached
•
Ensure that there is no activity in the network
•
Attach fiber cable from the GT-70X to the fiber network.
TX, RX must be paired at both ends
•
Connect the 5VDC power adapter to the GT-70X and
verify that the Power LED lights up.
•
Turn on the power of the device/station, the PWR LEDs
should light when all cables are attached
Note:
Please refers to section 8 for detailed wiring information
of the GT-70X
1000Base-T
Cat. 5/5e TP
Cable Network
GT-70X
Gigabit Ethernet Converter
1000Base-SX/LX
To prevent from optic acceptor malfunction, check the
both wires / transmitter before power on the converter.

6. Duplex Mode Support

The GT-70X is one-channel media conversion between
1000Base-T and 1000Base-SX/LX.
1000Base-T port can work under Auto-negotiation and
fixed 1000Mbps full duplex mode.
1000Base-SX/LX
Fiber Network
3