LG PF85U Owner's Manual page 86

86 CUSTOMIZING SETTINGS
Item
Super Provides a crystal-clear picture by improving the details in areas
Resolution where the picture is blurry or unclear.
Color Gamut Selects the range of colors that can be expressed.
Edge Enhancer Shows clearer and distinctive yet natural edges of the video.
xvYCC Displays much richer colors.
Color Filter Filters a specific color spectrum in RGB colours to fine-tune colour
saturation and hue accurately.
Expert Pattern Patterns used for expert adjustment.
Gamma Sets the gradation curve according to the output of the picture
signal in relation to the input signal.
White Balance Adjusts white balance. Detailed adjustment is possible as shown
below.
a. Method: 2 points
b. Method: 20 point IRE
Color
Adjusts Red/Green/Blue/Cyan/Magenta/Yellow colors. Allows an
Management expert to adjust the tint using a test pattern. Six colors (Red/Green/
System Blue/Cyan/Magenta/Yellow) can be selectively adjusted without
affecting other colors. You may not see colors change on a normal
picture even after adjustment.
- Saturation Red/Green/Blue/Yellow/Cyan/Magenta,
* Depending on input signal or other picture settings, the range of detailed items for
adjustment may differ.
Standard: Displays the original colors of an input signal
y y
regardless of the display features.
Wide: Makes use of the display's rich colors.
y y
- Pattern: Inner, Outer
- Points: Low, High
- Red/Green/Blue: Adjustable range -50 - +50.
- Apply to all inputs: The values of the White Balance is
- Pattern: Inner, Outer
- Institute of Radio Engineers (IRE) is the unit indicating the
size of a video signal and can be set to 5, 10, 15, ... 100.You
can fine-tune for each setting as shown below.
- Red/Green/Blue: The adjustment range is -50 - +50.
- Apply to all inputs: The values of the White Balance is
Tint Red/Green/Blue/Yellow/Cyan/Magenta,
Luminance Red/Green/Blue/Yellow/Cyan/Magenta:
The adjustment range is -30 - +30 each.
Description
applied to all the input modes.
applied to all the input modes.