Hdmi To Dvi Connection - LG PF85U Owner's Manual

HDMI to DVI Connection

Using an HDMI to DVI cable, connect
the projector's HDMI IN port to the DVI
OUT port.
To output audio, use an audio cable for
connection.
Press the INPUT button on the remote
control to select HDMI. You can connect
with any HDMI input port.
* Optional
Extras
(Audio)
AUDIO OUT
* Optional
Extras
(Video)
DVI OUT
CONNECTING DEVICES
NOTE
It is recommended to use an HDMI
y y
connection for the best image
quality.
Depending on the graphics card,
y y
DOS mode video may not work if a
HDMI to DVI Cable is in use.
In PC mode, there may be noise
y y
associated with the resolution,
vertical pattern, contrast, or
brightness. If noise is present,
change the PC output to another
resolution, change the refresh
rate to another rate or adjust the
brightness and contrast on the
PICTURE menu until the picture is
clear.
The synchronization input form for
y y
Horizontal and Vertical frequencies
is separate.
Depending on the graphics card,
y y
some resolution settings may not
allow the image to be positioned on
the screen properly.
If you are using DVI out from a PC,
y y
you have to connect analog audio
separately.
When using the HDMI/DVI cable,
y y
Single link only is supported.
105