Mono Mode; Air Distribution - Ford Galaxy Owner's Handbook Manual

You can set the temperature
between 16ºC (61ºF) and 28ºC (82ºF)
in steps of 0.5ºC (1ºF). In position LO
(below 16ºC [61ºF]) the system will
switch to permanent cooling, in
position HI (above 28ºC [82ºF]) to
permanent heating, and will not
regulate a stable temperature.

Mono mode

In mono mode, the temperature
settings for both the driver s and
passenger s side are linked. If you
adjust the temperature using the
rotary control on the driver s side, the
same temperature will be set for the
passenger s side. MONO is shown
in the display.
To switch mono mode off
Select a temperature for the
passenger s side using the rotary
control on the passenger s side.
Mono mode will switch off and
MONO disappears from the display.
The temperature for the driver s side
will remain unchanged. You can now
adjust the driver's and passenger's
side temperatures independently of
each other. The temperatures are
shown in the display. You can set a
difference of up to 4ºC (7ºF).
Note: If you set a difference of
greater than 4°C (7ºF), the
temperature on the other side will be
adjusted so that the difference
remains at 4°C (7ºF).
Note: If you set one of the sides to
HI or LO, both sides will be set to HI
or LO.
Climate control
To switch mono mode back on
Press the MONO button. MONO is
shown in the display, and the
passenger s side temperature will be
adjusted to the driver s side
temperature.
Blower
High speed
Low speed
Use the buttons to adjust the blower
speed.
The blower setting is shown in the
display.
To return to auto mode, press the
AUTO button.

Air distribution

To adjust air distribution, press the
desired button. Any combination of
settings can be selected
simultaneously.
117