Brightness Button - Samsung SyncMaster 710T User Manual

3.

Brightness button [ ]

2,3. Adjust buttons [
4. Enter button [ ] /
Source button
5. Auto button
6. Power button
7. Power indicator
See PowerSaver
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods.
Rear
(The configuration at the back of the monitor may vary from product to product.)
1. Power port
2. DVI port
3. D-sub 15-pin port
See Connecting Your Monitor
Downloaded from ManualMonitor.com Manuals
If this is the case, adjust the Brightness and Contrast by using the
OSD menu.
>>Click here to see an animation clip
When OSD is not on the screen, Push the button to adjust brightness.
] Adjust items in the menu.
Activate a highlighted menu item. /
Push the 'Source', then Selects the Video signal while the OSD is off.
(When the Source button is pressed to change the input mode, a
message appears in the center of the screen displaying the current mode
-- analog or digital input signal.) Note : If you select the Digital mode,
you must connect your monitor to the graphic card's port using the DVI
cable.
Use this button for auto adjustment direct access.
Use this button for turn the monitor on and off.
This light glows green during normal operation, and blinks green once as
the monitor saves your adjustments.
described in the manual for further information regarding power saving functions.
Connect the power cord for your monitor to the power port on the back of
the monitor.
Connect the DVI Cable to the DVI Port on the back of your Monitor.
Connect the signal cable to the 15-pin, D-sub connector on the back of your
monitor.
for further information regarding cable connections.