1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Monitor
  5. SyncMaster 710T
  6. User manual

Samsung SyncMaster 710T User Manual

Hide thumbs Also See for SyncMaster 710T:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , User Manual
SyncMaster 710T / 910T / 710N / 910N / 510T / 510N / 512N
/ 712N / 912N
Downloaded from ManualMonitor.com Manuals

Advertisement

Table of Contents
loading

Related Manuals for Samsung SyncMaster 710T

Summary of Contents for Samsung SyncMaster 710T

  • Page 1 SyncMaster 710T / 910T / 710N / 910N / 510T / 510N / 512N / 712N / 912N Downloaded from ManualMonitor.com Manuals...
  • Page 2 Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock Power When not used for extended periods of time, set your computer to DPMS.

  • Page 3: Installation

    Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage.
  • Page 4 Set down the monitor carefully. It could be damaged or broken. Do not place the monitor face down. The TFT-LCD surface may be damaged. Installing a wall bracket must be done by a qualified professional. Installation by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual.
  • Page 5 Contact a Service Center or Customer Center for interior cleaning once a year. Keep the product's interior clean. Dust which has accumulated in the interior over an extended period of time may cause malfunction or a fire. Other Do not remove cover (or back). No user serviceable parts inside. This may cause an electric shock or a fire.
  • Page 6 This may cause a breakdown, electric shock or a fire due to damage to the cable. Do not cover the vents on the monitor cabinet. Bad ventilation may cause a breakdown or fire. Do not place water containers, chemical products or small metal objects on the monitor.
  • Page 7 To ease eye strain, take at least a five-minute break after every hour of using the monitor. Do not use the monitor where it can be exposed to strong vibrations. Exposure to strong vibrations can be a fire hazard and shorten the life of the monitor.
  • Page 8 SyncMaster 510T / 710T / 910T Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Unpacking Option 1 SyncMaster 510T Moniter & Simple stand Bottom Hanger Option 2 Monitor & Pivot stand Manual User's Guide, Monitor Downloaded from ManualMonitor.com Manuals...
  • Page 9 Dirver, Natural Color Quick Setup Guide Warranty Card software, MagicTune™ software CD (Not available in all locations) Cable D-Sub Cable Power Cord DVI Cable(option) Front Menu button [ ] Opens the OSD menu. Also used to exit the OSD menu or return to the previous menu.

  • Page 10: Brightness Button

    If this is the case, adjust the Brightness and Contrast by using the OSD menu. >>Click here to see an animation clip Brightness button [ ] When OSD is not on the screen, Push the button to adjust brightness. 2,3. Adjust buttons [ Adjust items in the menu.
  • Page 11 SyncMaster 710T / 910T (Option) (The configuration at the back of the monitor may vary from product to product.) Connect the power cord for your monitor to the power port on the back 1. Power port of the monitor. Connect the DVI Cable to the DVI Port on the back of your Monitor.
  • Page 12 SyncMaster 510N / 710N / 910N / 512N / 712N / 912N Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Unpacking SyncMaster 510N / 512N Option 1 Moniter & Simple stand Bottom Hanger Option 2...
  • Page 13 Dirver, Natural Color Quick Setup Guide Warranty Card software, MagicTune™ software CD (Not available in all locations) Cable D-Sub Cable Power Cord Front Menu button [ ] Opens the OSD menu. Also used to exit the OSD menu or return to the previous menu.
  • Page 14 If this is the case, adjust the Brightness and Contrast by using the OSD menu. >>Click here to see an animation clip Brightness button [ ] When OSD is not on the screen, Push the button to adjust brightness. 2,3. Adjust buttons [ Adjust items in the menu.

  • Page 15: Monitor Assembly

    SyncMaster 510T / 710T / 910T Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1. Using the D-sub (Analog) connector on the video card. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
  • Page 16 SyncMaster 510N / 710N / 910N / 512N / 712N / 912N Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1.
  • Page 17 SyncMaster 510T / 510N / 512N 1. Monitor and Bottom 2. Monitor and Hanger Pivot Stand Attaching a base This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad. Downloaded from ManualMonitor.com Manuals...
  • Page 18 Follow the directions as appropriate for the operating system you have. Prepare a blank disk and download the driver program file at the Internet web site shown here. Internet web site : http://www.samsung.com/ (Worldwide) http://www.samsungusa.com/monitor (USA) http://www.sec.co.kr/monitor (Korea) http://www.samsungmonitor.com.cn/...
  • Page 19 This monitor driver is under certifying MS logo,and this installation don't damage your system.The certified driver will be posted on Samsung Monitor Homepage http://www.samsung.com/. 5. Monitor driver installation is completed. Windows XP Windows 2000 Windows NT Linux When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor.
  • Page 20 5. Click "Update Driver.." and select "Install from a list or.." then click "Next" button. 6. Select "Don't search ,I will.." then click "Next" and then click "Have disk". 7. Click the "Browse" button then choose A:(D: Driver) and choose your monitor model in the model list and click the "Next"...

  • Page 21: Microsoft ® Windows ® 2000 Operating System

    This monitor driver is under certifying MS logo,and this installation don't damage your system.The certified driver will be posted on Samsung Monitor Homepage http://www.samsung.com/ 9. Click the "Close" button then click "OK" button continually. 10. Monitor driver installation is completed.

  • Page 22: Natural Color

    Samsung Electronics in association with Korea Electronics & Telecommunications Research Institute (ETRI). This system is available only for Samsung monitors and makes the color of the images on the monitor the same as the printed or scanned images.
  • Page 23 How to install the Natural Color software Insert the CD included with the Samsung monitor into the CD-ROM Drive. Then, the initial screen of the program Natural Color will be executed. Click Natural Color on the initial screen to install the Natural Color software.
  • Page 24 SyncMaster 510T / 710T / 910T 1. Use this button for open the on-screen menu and exits from the menu screen or closes screen adjustment menu. 2. These buttons allow you to adjust items in the menu. 3. These buttons allow you to adjust items in the menu. 4.
  • Page 25 Brightness Menu Description Brightness Adjust Brightness. Source Menu Description Source Selects the Video signal while the OSD is off. Brightness Contrast 1. Picture 2. Color Color Tone Color Control Gamma 3. Image Coarse Fine Sharpness H-Position V-Position 4. OSD Language H-Position V-Position Transparency...
  • Page 26 Menu Description Play/Stop Follow these steps to change the language used in the menu. You can choose one of seven languages. (English, German, Language Spanish, French, Italian, Swedish, Russian) Note:The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. You can change the horizontal position where the OSD menu H-Position appears on your monitor.
  • Page 27 SyncMaster 510N / 710N / 910N / 512N / 712N / 912N 1. Use this button for open the on-screen menu and exits from the menu screen or closes screen adjustment menu. 2. These buttons allow you to adjust items in the menu. 3.
  • Page 28 Brightness Menu Description Brightness Adjust Brightness. Brightness Contrast 1. Picture Color Tone Color Control Gamma 2. Color Coarse Fine Sharpness H-Position V-Position 3. Image Language H-Position V-Position Transparency Display Time 4. OSD 5. Setup Image Reset Color Reset 6. Information Picture Menu Description...
  • Page 29 Menu Description Play/Stop Follow these steps to change the language used in the menu. You can choose one of seven languages. (English, German, Language Spanish, French, Italian, Swedish, Russian) Note:The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. You can change the horizontal position where the OSD menu H-Position appears on your monitor.

  • Page 30: What Is Magictune

    Color Overview Install OSD Mode Uninstall Troubleshooting Calibration Overview What is MagicTune™? Monitor performance can vary due to the graphics card, host computer lighting conditions and other environmental factors. In order to get the best image on a monitor requires you to adjust it for your unique setting.
  • Page 31 Color Overview Install OSD Mode Uninstall Troubleshooting Calibration Install 1. Insert the installation CD into the CD-ROM drive. 2. Click the MagicTune™ installation file. 3. Select installation Language, Click "Next". 4. When the InstallShield Wizard window appears, click "Next." 5. Select "I agree to the terms of the license agreement" to accept the terms of use. Downloaded from ManualMonitor.com Manuals...
  • Page 32 6. Choose a folder to install the MagicTune program. 7. Click "Install." 8. The "Installation Status" window appears. Downloaded from ManualMonitor.com Manuals...
  • Page 33 9. Click "Finish." 10. When the installation is complete, the MagicTune 2.5 executable icon appears on your desktop. Double-click the icon to start the program. Magictune execution icon may not appear depending on specification of computer system or monitor. If that happens, press F5 Key. 11.

  • Page 34: Installation Problems

    12. The following error message indicates that the system is using a video card that is not supported by MagicTune. Installation Problems The installation of MagicTune™ 2.5 can be affected by such factors as the video card, motherboard and the network environment.

  • Page 35: Osd Mode

    Color Overview Install OSD Mode Uninstall Troubleshooting Calibration MagicTune allows for quick accurate tuning of the display with the ability to easily save and use monitor configurations that are best suited for you. OSD mode may appear inconsistent with the explanation in guidance book depending on specification of each monitor.

  • Page 36: Color Tab Definition

    Allows the user to adjust the screen settings to the desired values. Brightness Contrast Resolution MagicBright Makes the entire screen brighter or darker. The detailed data of the images in the dark Brightness areas can be lost if the brightness is not adjusted to the proper level. Adjust the brightness for best viewing conditions.

  • Page 37: Image Tab Definition

    Color Tone Color Control Calibration The tone of the color can be changed. Color Tone Warm - Normal - Cool Custom Adjusts of the monitor image color. You can change the monitor color to your desired color. Color Control R- G - B The process through which the colors of your choice are optimized and maintained.

  • Page 38: Option Tab Definition

    Image Setup Position Fine : Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed). Image Setup Coarse : Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the Horizontal Control menu.

  • Page 39: Support Tab Definition

    Enable task tray menu . - To access the MagicTune menus, click the icon on the [task tray menu]. The menus are not displayed if the [Enable System Tray] is deselected in Preferences [Options] ' [Basic Settings]. Select Language - The language chosen affects only the language of the OSD. Source Select Analog Digital...

  • Page 40: Color Calibration

    Color Overview Install OSD Mode Uninstall Troubleshooting Calibration Color Calibration 1. Color Calibration Color Calibration guides you to get optimal color condition for your monitor. Proceed following 5steps for getting optimal monitor color condition . 1. Control "Brightness control bar" for matching the brightness of control patch and the brightness of background pattern 2.
  • Page 41 Press "Preview" button on the Color Calibration. The above picture will be shown. 1. Press "View Calibrated" button to see the calibration effect which you adjusted. 2. Press "View Uncalibrated" button to see the original image. Downloaded from ManualMonitor.com Manuals...
  • Page 42 Color Overview Install OSD Mode Uninstall Troubleshooting Calibration Uninstall The MagicTune program can be removed only by using the "Add or Remove Programs" option of the Windows Control Panel. Perform the following steps remove MagicTune. 1. Go to [Tusk Tray] ' [Start] ' [Settings] and select [Control Panel] in the menu. If the program runs on Windows XP, go to [Control Panel] in the [Start] menu.

  • Page 43: Troubleshooting

    Color Overview Installation OSD Mode Uninstall Troubleshooting Calibration Troubleshooting MagicTune may not work in case monitor is replaced or driver of graphic card is updated while MagicTune is operating. If so, please restart the system. Check when MagicTune does not function properly. * MagicTune feature is found only on PC (VGA) with Window OS that supports Plug and Play.
  • Page 44 SyncMaster 510T / 710T / 910T Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call, the phone number on the Information section or contact your dealer.
  • Page 45 x 1024 60Hz" message appears for one minute and then disappears. Please change to the recommended mode during this one-minute period. (The message is displayed again if the system is rebooted.) There is no image on the screen. The monitor is in PowerSaver mode. Is the power indicator on the monitor blinking at 1 second intervals? press a key on the keyboard to activate...

  • Page 46: Check The Following Items If There Is Trouble With The Monitor

    found". be supported. Check the following items if there is trouble with the monitor. 1. check if the power cord and the video cables are properly connected to the computer. 2. Check if the computer beeps more than 3 times when booting. (If it does, request an after-service for the main board of the computer.) 3.
  • Page 47 Failure of any of the boxes to appear indicates a problem with your monitor. This box also appears during normal operation if the video cable becomes disconnected or damaged. 4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor. If your monitor screen remains blank after using the previous procedure, check your video controller and computer system;...

  • Page 48: No Images On The Screen. I Cannot Turn On The Monitor

    SyncMaster 510N / 710N / 910N / 512N / 712N / 912N Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call, the phone number on the Information section or contact your dealer.

  • Page 49: The Screen Suddenly Has Become Unbalanced

    Is the power indicator on the monitor blinking at 1 second intervals? press a key on the keyboard to activate the monitor and restore the image on the screen. The screen shows Is the screen displaying only one color Check the signal cable strange colors or just as if looking at the screen through a connection.Make sure the video card is...
  • Page 50 General General Model Name SyncMaster 710T LCD Panel Size 17" Diagonal Display area 337.92 (H) x 270.336 (V) Pixel Pitch 0.264mm (H) x 0.264mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz...
  • Page 51 This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality. ® As an ENERGY STAR Partner, SAMSUNG has determined that this product ® meets the ENERGY STAR guidelines for energy efficiency. Downloaded from ManualMonitor.com Manuals...
  • Page 52 Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows.
  • Page 53 General General Model Name SyncMaster 910T LCD Panel Size 19" Diagonal Display area 376.32 (H) x 301.056 (V) Pixel Pitch 0.294mm (H) x 0.294mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16,777,219 Colors Resolution...
  • Page 54 This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality. ® As an ENERGY STAR Partner, SAMSUNG has determined that this product Downloaded from ManualMonitor.com Manuals ® meets the ENERGY STAR guidelines for energy efficiency.
  • Page 55 Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows.
  • Page 56 General General Model Name SyncMaster 710N / 712N LCD Panel Size 17" Diagonal Display area 337.92 (H) x 270.336 (V) Pixel Pitch 0.264mm (H) x 0.264mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16,194,277 Colors Resolution...
  • Page 57 This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality. ® As an ENERGY STAR Partner, SAMSUNG has determined that this product ® meets the ENERGY STAR guidelines for energy efficiency. Preset Timing Modes...

  • Page 58: Vertical Frequency

    If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Table 1.
  • Page 59 General General Model Name SyncMaster 910N / 912N LCD Panel Size 19" Diagonal Display area 376.32 (H) x 301.056 (V) Pixel Pitch 0.294mm (H) x 0.294mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16 194 277 Resolution...
  • Page 60 This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality. ® As an ENERGY STAR Partner, SAMSUNG has determined that this product ® meets the ENERGY STAR guidelines for energy efficiency. Preset Timing Modes...
  • Page 61 If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Table 1.
  • Page 62 General General Model Name SyncMaster 510T LCD Panel Size 15" Diagonal Display area 304.1 (H) x 228.1 (V) Pixel Pitch 0.297 (H) x 0.297 (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 61 kHz Vertical 56 ~ 75 Hz Display Color 16,194,277 Colors Resolution...
  • Page 63 This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality. ® As an ENERGY STAR Partner, SAMSUNG has determined that this product ® meets the ENERGY STAR guidelines for energy efficiency. Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically.
  • Page 64 Table 1. Preset Timing Modes Horizontal Vertical Pixel Clock Sync Polarity Display Mode Frequency Frequency (MHz) (H/V) (kHz) (Hz) IBM, 640 x 350 31.469 70.086 25.175 IBM, 640 x 480 31.469 59.940 25.175 IBM, 720 x 400 31.469 70.087 28.322 MAC, 640 x 480 35.000 66.667...
  • Page 65 General General Model Name SyncMaster 510N / 512N LCD Panel Size 15" Diagonal Display area 304.1 (H) x 228.1 (V) Pixel Pitch 0.297 (H) x 0.297 (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 61 kHz Vertical 56 ~ 75 Hz Display Color 16,194,277 Colors Resolution...
  • Page 66 This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality. ® As an ENERGY STAR Partner, SAMSUNG has determined that this product ® meets the ENERGY STAR guidelines for energy efficiency. Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically.
  • Page 67 Table 1. Preset Timing Modes Horizontal Vertical Pixel Clock Sync Polarity Display Mode Frequency Frequency (MHz) (H/V) (kHz) (Hz) IBM, 640 x 350 31.469 70.086 25.175 IBM, 640 x 480 31.469 59.940 25.175 IBM, 720 x 400 31.469 70.087 28.322 MAC, 640 x 480 35.000 66.667...
  • Page 68 Service The address and phone number of the company can be changed without previous notice. AUSTRALIA : Samsung Electronics Australia Pty Ltd. Customer Response Centre 7 Parkview Drive, Homebush Bay NSW 2127 Tel : 1300 362 603 http://www.samsung.com.au/ BRAZIL : Samsung Eletronica da Amazonia Ltda.
  • Page 69 Fax: 01-55-5747-5202 / 01-800-849-1743 http://www.samsung.com.mx/ RFC: SEM950215S98 http://www.samsung.com.mx/ IMPORTADO POR: SAMSUNG ELECTRONICS MEXICO. S.A. DE C.V. Saturno NO.44, Col. Nueva Industrial Vallejo IMPORTADO POR: SAMSUNG ELECTRONICS MÉXICO. S.A. de C.V. Gustavo A.Madero C.P.07700, Mexico D.F. Mexico TEL. 01-55-5747-5100 / 01-800-726-7864 Vía Lopez Portillo No.
  • Page 70 Tel. 214 148 114/100 Fax. 214 148 133/128 Free Line 800 220 120 http://www.samsung.pt/ SOUTH AFRICA : Samsung Electronics,5 Libertas Road, Somerset Office Park, Bryanston Ext 16. Po Box 70006, Bryanston,2021, South Africa Tel : 0027-11-549-1621 Fax : 0027-11-549-1629 http://www.samsung.co.za/...

  • Page 71: For Better Display

    Fax. : (01952) 292 033 http://samsungservice.co.uk/ U.S.A. : Samsung Electronics America Service Division 400 Valley Road, Suite 201 Mount Arlington, NJ 07856 1-800-SAMSUNG (1-800-726-7864) http://samsungusa.com/monitor/ Terms Dot Pitch The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the resolution.
  • Page 72 Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

  • Page 73: Fcc Information

    Federal Communications Commission. It is available from the U.S. Government Printing Office, Washington, DC 20402, Stock Number 004-000-00345-4. The party responsible for product compliance: SAMSUNG ELECTRONICS CO., LTD America QA Lab of Samsung 3351 Michelson Drive, Suite #290, Irvine, CA92612 USA Tel) 949-975-7310...
  • Page 74 MPR II Compliance This monitor complies with SWEDAC(MPR II) recommendations for reduced electric and magnetic fields. European Notice(Europe Only) Products with the CE marking comply with the EMC Directive(89/336/EEC), (92/31/EEC), (93/68/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.

  • Page 75: Environmental Requirements

    There are also other characteristics of a monitor, such as energy consumption levels, that are important from both the working and natural environment viewpoints. Since all types of conventional electricity generation have a negative effect on the environment (acidic and climate-influencing emissions, radioactive waste, etc.) it is vital to conserve energy.

  • Page 76: Cfcs (Freons)

    electronics components concerned with the display unit. CFCs (freons) CFCs (freons) are sometimes used for washing printed circuit boards and in the manufacturing of expanded foam for packaging. CFCs break down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on Earth of ultraviolet light with consequent increased risks of skin cancer (malignant melanoma).
  • Page 77 via the Internet, using the address: http://www.tco-info.com/ Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances.
  • Page 78 For recycling information for TCO'03 certified monitors, for the residents in the following countries, please contact the company corresponding to your region of residence. For those who reside in other countries, please contact a nearest local Samsung dealer for recycling information for the products to be treated in environmentally acceptable way.
  • Page 79 Mercury Statement (LCD Monitor, LCD TV, DLP Projection TV, Projector for USA only) LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS For details see lamprecycle.org, eiae.org, or call 1-800-Samsung Downloaded from ManualMonitor.com Manuals...

  • Page 80: Product Information (Image Retention Free)

    PRODUCT INFORMATION (Image Retention Free) LCD Monitors and TVs may have image retention when switching from one image to another especially after displaying a stationary image for a long time. This guide is to demonstrate correct usage of LCD products in order to protect them from Image retention.
  • Page 81 The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it. Image retention may not occur when a LCD panel is operated under normal conditions. Normal conditions are defined as continuously changing video patterns.

This manual is also suitable for:

Syncmaster 510tSyncmaster 510nSyncmaster 512nSyncmaster 712nSyncmaster 912nSyncmaster 910t ... Show all

Table of Contents