Sony PCS-G70 Setup Manual page 2

Connecting the Cables
1. Connect a Female XLR – 1/8" audio cable between the XLR "CONF OUT" port on
the Fusion and the "MIC 1" port on the PCS-G70.
2. Connect a Male RCA-RCA audio cable between the "CONF IN" port on the
Fusion and the non-mixed "AUDIO OUT" port on the PCS-G70.
3. Connect a Male RCA audio cable between the "Room Out" port on the Fusion
and the Amplified Speakers.
NOTE: You must use your Fusion remote control to control the room volume
for both the audio and video conference calls. Adjusting the volume in the
video codec will cause echo.
3
2
1
1
2