Motorola DCT 2000 Owner's Manual page 37

No color
• Make sure the current TV program is broadcast in color.
• Adjust the color controls on your television.
Remote control does not work
• Verify that the batteries are working by pressing the power button
to see if the red light at the top of the remote turns on. If it does not,
replace the batteries.
• Point the remote control directly at the receiver when
changing channels.
• Make sure you properly programmed the remote control, refer to the
guide you received with your remote.
• If you purchased new equipment, refer to the guide you received
from the manufacturer to re-program your remote.
Settop does not power on
• Make sure the receiver is properly plugged into an electrical outlet.
• Make sure all cables are properly connected.
• If the electrical outlet is controlled by a wall switch, make sure the
switch is in the ON position.
Troubleshooting
58