Once the Clock option is set to
you are ready to set the time.
Note: The first time you enter the
set-up mode, the Clock option will
be preset to
option to
, see page 47, "Entering
and Using the Set-Up Mode. "
. To set the Clock
If you do not want to display the time
,
and date, press the C button to turn the
Clock option to
Note: The meter records the time
and date of each test even when the
Clock option is set to
can once again be seen by turning
the Clock option to
Setting the Time
Enter the set-up mode and set the Clock
option to
M button to display the current time
setting. Press the C button to change
50
.
. They
.
(see page 47). Use the