Lifescan OneTouch Basic Basic Blood Glucose Monitoring System Owner's Booklet page 24

Step 2: When apply sample
Appears, Remove the Check Strip from
the Test Strip Holder.
Note: This is the only time you
should remove a strip during
a test.
Note: Do not apply control
solution to the check strip.
M C
1
✔
Step 3: When insert side 2
Appears, Turn the Check Strip Over
and Slide It Back into the Test Strip
Holder.
It should go in notched end first, Side 2
(white side) facing up. The meter counts
down from four to zero and then gives
you a check strip result.
16
M C
2
✔