using a special cable that plugs into your phone's headset jack. If this cable was not provided with your
TTY phone, contact your TTY phone manufacturer to purchase the connector cable.
1. Press
2. Tap Call, and then tap TTY mode to choose a mode, from TTY Off, TTY Full, TTY HCO, or TTY
VCO.
DTMF Tones
Set the length of Dual-tone Multi-frequency (DTMF) tones, which play when you use the keypad during a
call, such as when navigating menus.
1. Press
2. Tap Call, and then tap DTMF tones to choose a tone length, from Normal, or Long.
DDTM
When DDTM is enabled, you can make/receive voice calls or use voicemail while using mobile networks.
1. Press
2. Tap Call, and then tap DDTM to enable or disable the option.
Voicemail Settings
Set options for Visual Voicemail.
1. Press
2. Tap Call, and then tap Voicemail settings to configure options for voicemail.
Blocking Mode Settings
When Blocking mode is enabled, notifications for selected features are blocked, and you only receive the
notifications you choose. You can choose to block notifications by feature or contact, and choose blocking
all the time, or during a specific time period.
1. Press
2. Tap the ON/OFF switch next to Blocking mode to enable or disable the setting. Blocking mode
must be enabled to configure options.
3. When Blocking mode is enabled, choose features to block:
Block incoming calls: When enabled, notifications for incoming calls will not display. Tap
the check box next to the option to enable or disable it.
Turn off notifications: When enabled, notifications for new messages will not display. Tap
the check box next to the option to enable or disable it.
Settings
and then tap
> Settings > My device.
and then tap
> Settings > My device.
and then tap
> Settings > My device.
and then tap
> Settings > My device.
and then tap
> Settings > My device.
112