Charge the Battery
After you install the battery, charge it before using your phone.
Note: Your phone's battery should have enough charge for the phone to turn on and find a signal, run the
setup application, set up voicemail, and make a call. You should fully charge the battery as soon as
possible.
1.
Plug the USB cable into the charger/accessory jack on the bottom of the phone.
2.
Plug the USB cable into the charging head, and then plug the charging head into an electrical
outlet.
Turn your Phone On
Use the Power/Lock Key to turn your phone on or off, to lock the screen or display the lock screen, and to
access the Device options menu.
■
Press the Power/Lock Key to turn the phone on.
If your phone is activated, it will turn on, search for service, and begin the setup application.
If your phone is not yet activated, see
Get Started
Activate Your Phone
for more information.
2