Pulling Away - Mercedes-Benz GLK 350 4MATIC Operator's Manual

Glk-class
Hide thumbs Also See for GLK 350 4MATIC:
Table of Contents

Advertisement

G
WARNING
Flammable materials introduced through
environmental influence or by animals can
ignite if in contact with the exhaust system or
parts of the engine that heat up. There is a risk
of fire.
Carry out regular checks to make sure that
there are no flammable foreign materials in
the engine compartment or in the exhaust
system.
! Do not depress the accelerator pedal
when starting the engine.
General notes
i
Vehicles with a gasoline engine: the
catalytic converter is preheated for up to
30 seconds after a cold start. The sound of
the engine may change during this time.
Automatic transmission
Shift the transmission to position P.
X
The transmission position display in the
multifunction display shows P.
i
You can also start the engine when the
transmission is in position N.
Starting procedure with the SmartKey
i
To start the engine using the SmartKey
instead of KEYLESS-GO, pull the Start/
Stop button out of the ignition lock.
To start a gasoline engine: turn the
X
SmartKey to position 3 in the ignition lock
(
page 145) and release it as soon as the
Y
engine is running.
To start a diesel engine: turn the
X
SmartKey to position 2 in the ignition lock
(
page 145).
Y
The % preglow indicator lamp in the
instrument cluster lights up.
When the % preglow indicator lamp
X
goes out, turn the SmartKey to position
3(
page 145) and release it as soon as the
Y
engine is running.
i
You can start the engine without preglow
if the engine is warm.
Using KEYLESS-GO to start the engine
You can start the engine if a valid SmartKey
with the integrated KEYLESS-GO function is
in the vehicle. Always take the SmartKey with
you when leaving the vehicle, even if you only
leave it for a short time. Pay attention to the
important safety notes.
i
The Start/Stop button can be used to
start the vehicle without inserting the
SmartKey into the ignition lock. The Start/
Stop button must be inserted in the ignition
lock and the SmartKey must be in the
vehicle.
Depress the brake pedal and keep it
X
depressed.
Press the Start/Stop button once
X
(
page 145).
Y
The engine starts.

Pulling away

Automatic transmission
G
WARNING
If the engine speed is above the idling speed
and you engage transmission position D or
R, the vehicle could pull away suddenly. There
is a risk of an accident.
When engaging transmission position D or R,
always firmly depress the brake pedal and do
not simultaneously accelerate.
i
It is only possible to shift the transmission
from position P to the desired position if
you depress the brake pedal. Only then is
the parking lock released. If you do not
depress the brake pedal, you can move the
DIRECT SELECT lever but the parking lock
remains engaged.
I n f o r m a t i o n P r o v i d e d b y :
Driving
147
Z

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Glk 3502014 glk class2014 x204Glk 250 bluetec

Table of Contents