Windshield Wipers; Rear Window Wiper - Mercedes-Benz GLK 350 4MATIC Operator's Manual

Combination switch
$ Windshield wiper off
1
2 Ä Intermittent wipe, low
3
Å Intermittent wipe, high
° Continuous wipe, slow
4
¯ Continuous wipe, fast
5
í Single wipe/î To wipe the
B
windshield using washer fluid
Switch on the ignition.
X
Turn the combination switch to the
X
corresponding position.
! Vehicles with a rain sensor: if the
windshield becomes dirty in dry weather
conditions, the windshield wipers may be
activated inadvertently. This could then
damage the windshield wiper blades or
scratch the windshield.
For this reason, you should always switch
off the windshield wipers in dry weather.
If the wiper blades are worn, the windshield
will no longer be wiped properly. This could
prevent you from observing the traffic
conditions. Replace the wiper blades twice a
year, ideally in spring and fall.
7 Rain sensor set to low sensitivity.
Rain sensor set to high sensitivity.
8
Switching the rear window wiper on/
off
7
Combination switch
8
è Switch
:
ô To wipe with washer fluid
2
I To switch on intermittent wiping
3
0 To switch off intermittent wiping
4
ô To wipe with washer fluid
5
Turn the SmartKey to position 1 or 2 in the
X
ignition lock.
Turn switch : on the combination switch
X
to the corresponding position.
When the rear window wiper is switched on,
the icon appears in the instrument cluster.
Replacing the wiper blades
Important safety notes
G WARNING
If the windshield wipers begin to move while
you are changing the wiper blades, you could
be trapped by the wiper arm. There is a risk
of injury.
Always switch off the windshield wipers and
ignition before changing the wiper blades.
! Never open the hood/tailgate if a wiper
arm has been folded away from the
windshield/rear window.
I n f o r m a t i o n P r o v i d e d b y :

Windshield wipers

123
Z