Life Fitness S9i Assembly Instructions Manual page 5

S series stairclimber

Hide thumbs Also See for S9i:

1. Before proceeding, familiarize yourself with the parts of the

Stairclimber and make sure that you have received all the items

described in the Parts List.

2. Locate the MONOCOLUMN (#10). Position the MONOCOLUMN

SHROUD (#18) onto the MONOCOLUMN as shown. Position the

MONOCOLUMN near the MONOCOLUMN MOUNTING BRACKET

(B) as shown. Detach and feed the CONSOLE WIRE HARNESS

CONSOLE MOUNTING BRACKET (D) ACCESS HOLE. Pivot the

MONOCOLUMN upright and position the locating slot at the

bottom of the MONOCOLUMN onto the pre-installed LOCATING

BOLT (E) on the MONOCOLUMN MOUNTING BRACKET. Align

the mounting holes of the MONOCOLUMN and MONOCOLUMN

MOUNTING BRACKET and secure them together using two

MOUNTING BOLTS (#1) and LOCKNUTS (#2). Leave the BOLTS

and NUTS loose at this time. Lower the MONOCOLUMN

SHROUD until it rests on the MAIN SHROUDS.

CAUTION: BE CAREFUL NOT TO PINCH THE WIRE HARNESS

WHEN ASSEMBLING THE MONOCOLUMN (#10) TO THE

MONOCOLUMN MOUNTING BRACKET (B).

3. Align and insert the HANDLEBAR ASSEMBLY (#13) into THE

HANDLEBAR BRACKET TUBE (F) as shown until the mounting

holes in the HANDLEBAR ASSEMBLY align with those of the

HANDLEBAR BRACKET TUBE.

Table of Contents