Switching Off The Refrigerator; Practical Advice For Saving Energy - Smeg FAB5 Instruction Manual

Hide thumbs Also See for FAB5:
Table of Contents

Advertisement

6.2 Switching off the refrigerator

If the refrigerator is to be out of use for some time, turn the thermostat knob to 0. Then empty the
appliance, disconnect it from the mains, and dry any residual moisture which has collected. Leave the
door ajar to prevent the humidity and trapped air from creating unpleasant smells.

6.3 Practical advice for saving energy

- Install the refrigerator in a cool, well ventilated place, protected against direct sunlight and well away
from heat sources.
- Do not place hot foods in the refrigerator. Wait for foods and drinks to cool to room temperature
before placing them on the shelves.
- Open the door(s) as infrequently and for as short a time as possible to prevent the refrigerator from
warming up too much.
- Clean the condenser (rear of the refrigerator) periodically to prevent the appliance from losing efficiency.
- On models equipped with intensive cooling, do not leave this function activated for longer than
absolutely necessary.
- If the refrigerator is to be out of use for a long period, it is best to empty it and switch it off.
Instructions for the User
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents