Pnp/Pci Configurations - Partner PT-6210-E User Manual

PnP/PCI Configurations

This option configures how PnP (Plug and Play) and PCI expansion cards operate in the system. Both the
ISA and PCI buses on the mainboard use system IRQs (Interrupt ReQuests) and DMAs (Direct Memory
Access). You must set up the IRQ and DMA assignments correctly through the PnP/PCI Configurations menu;
otherwise, the mainboard will not work properly. Selecting "PnP/PCI Configurations" on the main menu
displays this menu:
Phoenix - AwardBIOS CMOS Setup Utility
Reset Configuration Data
► IRQ Resources
INT Pin 1 Assignment
** PCI Express relative items **
Maximum Payload Size
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Reset Configuration Data
If you enable this item and restart the system, any PnP configuration data stored in the BIOS Setup is cleared
from memory.
Maximum Payload Size
This feature determines the maximum TLP (Transaction Layer Packet) payload size that can be supported
by the motherboard chipset's PCI Express controller. The TLP payload size determines the amount of data
transmitted within each data packet.
PnP/PCI Configurations
[Disabled]
[Press Enter]
Auto
[128]
F6:Fail-Safe Defaults
Item Help
F7:Optimized Defaults
Figure 2.14 PnP/PCI
Configuration menu
29