Installing The Thermal Paper Roll - Partner PT-6210-E User Manual

Installing the thermal paper roll

Refer to the following to install the thermal paper roll.
1. Open the printer cover.
2. Insert the thermal paper roll as
shown on the picture.
3. Pull a portion of the paper over the
printer output part.
For the papre
type, please refer
to Appendix.
NOTE
4. Close the cover and press it down
until you feel a click.
After installation,
the printer will
automatically feed
a few lines.
NOTE
Each time you
open and close
the printer cover,
the printer will
NOTE
automatically cut
a 2.5 centimeters
paper off with the
default setting.
9