Superio Device - Partner PT-6210-E User Manual

► SuperIO Device

Use this item to change settings for I/O devices. Select the item and press <Enter> to open the following
menu:
Phoenix - AwardBIOS CMOS Setup Utility
Onboard Serial Port 1
Onboard Serial Port 2
PWRON After PWR-Fail
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Onboard Serial Port 1/2
These items are used to assign the I/O address and IRQ for the onboard serial port 1/2. The default setting is
(3F8/IRQ4) / (2F8/IRQ3).
PWRON After PWR-Fail
This feature allows you to set the power-on action to be taken when the system recovers from a power failure.
26 C H A P T E R 2 B I O S S E T U P
SuperIO Device
[3F8/IRQ4]
[2F8/IRQ3]
[Off]
F6:Fail-Safe Defaults
Item Help
F7:Optimized Defaults
Figure 2.11 SuperIO Device
submenu