Emergency Manoeuvre; Soft Top Initialisation - Fiat 500 C Manual

Emergency manoeuvre

If the control buttons fail, the soft top can be moved manually proceeding as described below:
1. take the supplied wrench A placed in the luggage compartment with the tool box or the Fix &
Go.
2. Fit the wrench in the suitable housing inside the luggage compartment, under the rear shelf,
as shown in the figure.
3. Turn: in clockwise direction to open the soft top and counter-clockwise to close it.

Soft top initialisation.

As a result of an emergency manoeuvre, the soft top could fail to operate automatically. The
initialisation procedure must be carried out. This can be made by Examiner in BCM diagnosis mode.
The initialisation procedure is guided by the diagnosis instrument, informing the operator about the
operations to be made on interior movement buttons.
At the end of the operations, if the initialisation procedure was positive, the soft top carries out the
following cycle, automatically:
1. complete opening
2. complete closing
3. opening up to spoiler position
In case of battery disconnection, the soft top system does not lose its operating automatic movements.
- 25 - Fiat 500 C – S&S