Assembly Instructions - Stamina SlimStrider 360 55-9162 Owner's Manual

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Service section and order the part needed,
e-mail us at customerservice@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the
U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Unfold the FRONT SUPPORT(3) from the UPRIGHT(1) and lock
in position with the LOCKING PIN(31).
STEP 2
Attach the REAR STABILIZER(2) to the UPRIGHT(1) with two
CARRIAGE BOLTS(M8x1.25x60mm)(36) and two NYLOCK
N U T S ( M 8 x 1 . 2 5 ) ( 4 3 ) . B e s u r e t h e r o u n d e d h e a d o f t h e
CARRIAGE BOLTS(M8x1.25x60mm)(36) is on the underside of
the REAR STABILIZER(2), if not, damage could occur to the floor
or product.
7