Troubleshooting 123; Restore Original Settings - Nokia C7–00 User Manual

PUK or PUK2 code
(8 digits)
IMEI number
(15 digits)
Lock code (security
code)
(min. 4 digits or
characters)
Troubleshooting

Restore original settings

If your device is not working properly, you can reset some settings to their original
values.
1 End all active calls and connections.
2 Select Menu
Restore.
3 Enter the lock code.
This does not affect documents or files stored on your device.
After restoring the original settings, the device switches off, and then on again. This
may take longer than usual.
If not supplied with your SIM card or you forget the codes,
contact your service provider.
If you enter the code incorrectly three times in a row, you need
to unblock the code with the PUK or PUK2 code.
These are required to unblock a PIN or PIN2 code.
If not supplied with your SIM card, contact your service provider.
This is used to identify valid devices in the network. The number
can also be used to block, for example, stolen devices.
To view your IMEI number, dial *#06#.
This protects your device against unauthorized use.
You can set your device to ask for the lock code that you define.
Keep the code secret and in a safe place, separate from your
device.
If you forget the code and your device is locked, your device will
require service and additional charges may apply. Additional
charges may apply, and all the personal data in your device may
be deleted.
For more information, contact a Nokia Care Point or your device
dealer.
Settings and Phone
>
Phone management
>

Troubleshooting 123

Factory settings
> >