Headlight Switch; Parking Light Auto Cut; High-Beam Switch; Auto Light (If Installed) - Hyundai Tiburon Owner's Manual

1
FEATURES OF YOUR HYUNDAI
48
B340C04E-AAT

Headlight Switch

HGK2074
To operate the headlights, turn the barrel on the
end of the multi-function switch. The first posi-
tion turns on the parking lights, sidelights, tail
lights and instrument panel lights. The second
position turns on the headlights.
NOTE:
The ignition must be in the "ON" position
to turn on the headlight.

Parking light auto cut

o The purpose of this feature is to prevent the
battery from being discharged. The system
automatically turns off the small light when
the driver removes the ignition key and
opens the driver- side door.
o With this feature, the parklight will be turned
off automatically if the driver parks on the
side of road at night.
If necessary, to keep the lights on when the
ignition key is removed, perform the following :
1) Open the driver-side door.
2) Turn the parklights OFF and ON again using
the light switch on the steering column.
B340D01A-AAT

High-beam Switch

To turn on the headlight high beams, push the
lever forward (away from you). The high beam
indicator light will come on at the same time. For
low beams, pull the lever back toward you.
B340G01LZ-GAT

Auto Light (If installed)

HGK2075
To operate the automatic light feature, turn the
barrel on the end of the multi-function switch. If
you set the multi-function switch to "AUTO", the
tail lights and headlights will be turned automati-
cally on or off according to external illumination.
NOTE:
Switch on car light manually in foggy, cloudy
and rainy conditions.