Transaxle Fluid Capacity; To Check The Transaxle Fluid Level - Hyundai Tiburon Owner's Manual

6
DO-IT-YOURSELF MAINTENANCE
14
G110C02Y-AAT

Transaxle Fluid Capacity

The fluid capacity of the automatic transaxle is
8.2 U.S. quarts (7.8 liters).
!
WARNING:
The transaxle fluid level should be checked
when the engine is at normal operating
temperature. This means that the engine,
radiator, exhaust system etc., are very hot.
Exercise great care not to burn yourself
during this procedure.
G110D02Y-AAT

To Check the Transaxle Fluid Level

HGK3025
Park the car on level ground with the parking
brake engaged. When the transaxle fluid level
is checked, the transaxle fluid should be at
normal operating temperature and the engine
idling.
While the engine is idling, apply the brakes and
move the gear selector lever from "P" to each
of its other positions — "R", "N", "D" — and then
return to "N" or "P". With the engine still idling:
1. Open the hood, being careful to keep hands,
long hair and clothing clear of any moving
parts.
2.0L 2.7L
HGK5007
2. Remove the transaxle dipstick, wipe it clean,
reinsert the dipstick as far as it will go, then
remove it again. Now check the fluid level on
the dipstick. It should be in the "HOT" range
on the dipstick.
3. If the transaxle fluid level is low, use a funnel
to add transaxle fluid through the dipstick
tube until the level reaches the "HOT" range.
Do not overfill.