Pride Jazzy 623 Owner's Manual page 14

Power Chair Securement Points
The power chair may be equipped with four (4) tie-down points for the purpose of securing the unoccupied power
chair during motor vehicle transport. Each tie-down point is clearly labeld for this purpose.
To secure the power chair equipped with tie-down points:
Always secure the power chair in a forward-facing position in the vehicle.
Attach the four tie-down straps only to designated, labeled transit securement points indicated by anchor
symbols on the power chair. See figures 11 and 12. Tighten the straps to sufficiently remove all slack.
Never attach tie-downs to adjustable, moving, or removable parts of the power chair such as armrests, front
riggings, and wheels.
Position the anchor points for the rear tie-down straps directly behind the rear securement points on the power
chair. The front tie-down straps should be anchored to floor points that are spaced wider than the power chair
to provide increased stability. See figure 12.
MANDATORY! The power chair should be used as indicated in the manufacturer's instructions.
If you have any questions about the proper use of your power chair, contact your authorized
Pride Provider.
Figure 12. Unoccupied Transit System Securement Points
14
I V . A S S E M B L Y
www.pridemobility.com
FRONT
OF VEHICLE
Jazzy 623