Control Panel; Operating Instructions - Whirlpool ACM 213/BA Instruction Manual

2. OPERATING INSTRUCTIONS

CONTROL PANEL

Sensor controls for
1. ON/OFF key of left cookng zone
2. Cooking level Minus (-) left
3. Cooking level Plus (+) left
4. Maximum level left
5. Timer
6. Timer Minus (-)
Control panel graphics shown in these instructions might not match exactly the graphics of your hob.
Button's functions are the same for all hob models.
PRECAUTIONS AND ADVICE
To switch the hob on, press the
lightens, from left to right. To switch off, press the same button until the displays switch off. All the cooking zones
are switched off.
If the hob has been in use, the residual heat indicator "4
cooled down.
The hob automatically switches off if no function is selected within 10 seconds of switching on.
SWITCHING ON AND ADJUSTING COOKING ZONES
After switching on the hob and positioning the pot on the chosen cooking zone, adjust the heat setting using the
button or . Each cooking zone has different heat settings that can be adjusted using the buttons
which go from "1": min. heat setting to "6": max. heat setting, or cooking max level (
The cooking zone can also be set to level 1 by pressing keys "
max, right zone max level will be 4.
Switching off cooking zones
A cooking zone can be switched off by touching the ON/ OFF key
Press the key " " to set the level to "0".
Enclosure Mark
Cooking zones Diameter in mm
Left
Right
If the left cooking zone is set to max, the right cooking zone power level will be 600W.
button for approx. 2 seconds until the cooking zone (13-18) or (25-30) are
Rating in kW
110-220 Normal: 2.2
90-180 Normal: 1.34
7. Timer Plus(-)
8. Key Lock key
9. ON/OFF key of right cooking zone
10. Cooking level Minus (-) right
11. Cooking level Plus (+) right
12. Maximum level right
lamp from left" remains lit until the cooking zones have
th
" and " " at the same time. If the left zone is set to
.
2
/
).
,