Table of Contents
Advertisement
Available languages
Available languages
CONTROL PANEL
14 15 16 10 12 13
17
18
1.
ON/OFF switch on switch off
2.
Cooking zone +
3.
Cooking zone –
4.
Double/triple circuit activation
5.
Indepedent Led Timer (cannot be activated with other timers)
6.
Safety lock
7.
Double circuit selection Led
8.
Set value display
9.
Triple circuit selection Led
10. Timer value display
11. Led safety lock inserted
DAILY USE
SWITCHING ON "PENTA" TOUCH CONTROL
Activating the ON/OFF button you go from OFF mode to WAIT mode.
The cooking area display shows "0" in static mode. Activating the "+"
and "-"buttons of the selected cooking area you pass from WAIT mode
to ACTIVE mode. If you begin with the "+" button the cooking level
passes from "0" to "1". If you begin with the "-" button the cooking level
passes from "0" to "9". Holding down the "+" and "-" buttons increases
or decreases cooking level. The corresponding display shows an "H"
until the surface of the switched off area reaches a temperature below
60°C. All the cooking areas are switched off immediately with the ON/
OFF button.
SWITCHING OFF
a) Simultaneously pressing the "+" and "-" buttons of the relevant
cooking area. b) Select the minus key of the cooking area you reach "0".
DOUBLE AND TRIPLE CIRCUIT AREAS
The DOUBLE or TRIPLE function can be activated only when the
relevant cooking area is in ACTIVE mode (The active cooking zone is
obtained by pressing the "+" or
Visually greater illumination is evident of the display involved as well as
a reduction of the illumination for the other displays).
DOUBLE CIRCUIT
Select a zone with double circuit and activate the multi circuit key.An
Led (7) will come on if only zone with external circuit and 2 Leds (7+9)
if 2 zones are present with external circuit (tiple circuit). The external
circuit is activated with the multi-circuit button. The double circuit is
switched off by once more selecting the multi-circuit function (4).
TRIPLE CIRCUIT
The first pressing activates the second intermediate area (led 7).
The second pressing activates the third external area (led 9).
The third action deactivates both the multi-circuit zones.
8
5
3
2
3
"-
" key of the cooking zone chosen.
7
8
8
9 7 8
2
3
2
3
12. Right rear cooking zone timer led
13. Right front cooking zone timer led
14. Left front cooking zone timer led
15. Left rear cooking zone timer led
16. Right rear central cooking zone Timer Led
17. Timer -
18. Timer +
19. Max power (10 minutes)
TIMER FUNCTION
The timer functional module consists of a maximum of 6 countdown
timers (Countdown). 5 Timers can be assigned to the individual
cooking zones and one timer is independent of the cooking zones and
is also called "egg timer". The egg timer does not allow the use of other
timers.
The 2 7-segment displays (10) can indicate, for example, the timer of 5
cooking zones at the same time, but the timer with the shortest time
set will remain displayed. The LEDs (5-12-13-14-15-16-17-18-21) indicate
theassignments of the respective cooking zones with the exception of
the LED (5) which is for assigning the independent timer (egg timer).
The LEDs seek to follow the arrangement of the cooking zones, the
figure of the controls and its legend with the models "0-1-2" better
describes to which zone the illumination of a led cooking zone belongs
(for example the Led 15 indicates activation of the timer in the front
right cooking zone). The possible setting range moves between 1 and
99 minutes. After setting the timer, it counts the time backwards to 0,
after which an optical and acoustic alarm signal is emitted and if it is
setfor a cooking zone it turns off. Turning off the touch control with the
On/Off button also switches off all the timers.
TIMER SELECTION
•
Pressing the 19 or 20 key selects the timer. If the cooking zones
are at zero and none of them is selected, the timer set will be the
independent timer (egg timer) and will be highlighted by lighting
up the Led (5).
•
The Timer of the cooking zones is highlighted by lighting up the
cooking zone timer Led, for example for the front left cooking
zone the Led (16) will light up. Timers related to a cooking area can
be selected only when the latter is activated (cooking level > 0);
deactivated cooking areas are ignored.
•
The timer of the cooking areas is indicated by the lighting up of
the cooking area LED timer; for example, for the front left cooking
area, LED (16) will light up. The timer flashing warning light, as per
diagram 1, indicates that the values of the 7 segment display refer
to this timer. So the operator recognises immediately - seeing
the flashing LED of the timer module - which timer countdown is
shown on the 7 segment display.
8
11
19
2
3
2
6
EN
4
1
Advertisement
Table of Contents
