Child Lock; Timer; Control Panel Indicators; Auto Power Off - Whirlpool ACM 213/BA Instruction Manual

CHILD LOCK

This function locks the hob controls to prevent accidental switching on by children. To activate the child lock
function, switch on the hob then press the button "
shine statically.
The control panel is locked with the exception of the ON/OFF function. To unlock the controls, repeat the child lock
activation procedure. The illuminated dot switches off and the hob is active again.
The presence of cleaning water, liquid spilled from pots or any objects resting on the button below the symbol can
accidentally activate or deactivate the child lock function.

TIMER

The timer can be used to set a max. cooking time of 9 hours 59 minutes for one cooking zone only. Select the
cooking zone to be used with the timer then press
the buttons " " and "
the countdown. Once the set time has elapsed, an acoustic signal sounds and the cooking zone switches off
automatically.
To deactivate the timer, press the button "
Important!
The timer function can only be used with one cooking zone at a time.

CONTROL PANEL INDICATORS

RESIDUAL HEAT INDICATOR
The hob is fitted with a residual heat indicator for each cooking zone. These indicators alert the user when cooking
zones are still hot.
If the 4 lamp from the left is on, the cooking zone is still hot. If the residual heat indicator of a given cooking zone
th
is lit, that zone can be used, for example, to keep a dish warm or to melt butter.
When the cooking zone cools down, the display switches off
INCORRECT OR MISSING POT INDICATOR
The hob features an automatic pot detection system for all cooking zones. If no pot is detected, Erroe code "E3"
will be shown. Make sure the pot is correctly positioned and that it has the characteristics given in the section
"Before use".
AUTO-POWER OFF
A certain maximum operating time had been fixed on every activated cooking zone. The maximum operating time
depends on the selected power level. After expiry of the maximum operating time, the appliance will be shut off
automatically providing that no alteration of the setting for that cooking zone had been made for safety purpose.
Please use the timer setting if the cooking time excess the corresponding limitation.
Power Level
1
2
3
4
5
6
" of the timer function. A few seconds after the button is pressed, the timer begins
" until the display shows "0:0".
Left cooking zone
". The indicator (Indicator 35) above the safety lock key will
to activate the timer and set the desired cooking time using
Operation time limitation (minute)
420
300
240
180
120
90
3
Right cooking zone
420
300
240
180
120
90