Geq Screen - Yamaha TF5 User Manual

GEQ screen

Displayed when you tap the GEQ button in the TOOLBAR area.
You can use the internal graphic equalizer (GEQ) to process AUX 1–8 and STEREO channel signals.
The GEQ is a mono, 12-band EQ. Each band is 1/3 octave wide, with an adjustable gain range of ±15dB.
31 bands are available; you can adjust gain for up to 12 bands.
1
GEQ button
Turns the GEQ on and off.
2
GEQ channel selection buttons
These buttons are displayed only when configuring the GEQ for stereo AUX buses or the STEREO channels.
They are not displayed for mono AUX buses.
: Turns the GEQ left/right channel link on and off.
L/R: Allows you select the left and right GEQ channels. For AUX channels, L and R correspond to the channel pair, such as
AUX 1 and 2.
3
EQ graph, band selection
Displays the characteristics of the EQ.
You can tap an area to move the display area and center in on where you tapped the screen.
4
Gain sliders
Allow you to adjust the gain for the corresponding band. The gain value is displayed above the handle.
Double-tap a handle to set the corresponding band's gain to 0dB.
Swipe left or right on an empty area to display the gain sliders for other bands.
5
Output level meter
Displays the GEQ output level.
6
Available bands display
Displays the number of additional bands that you can adjust.
GEQ screen menu
The following items are available in the GEQ screen's context menu.
Copy: Copies the GEQ parameters of the selected channel to the clipboard.
Paste: Pastes the GEQ parameters in the clipboard to the selected channel.
Compare: Allows you to compare the GEQ parameters of the selected channel with the GEQ parameters in the clipboard by
switching between the two.
Default: Resets GEQ settings to their default values.
- 26 -
Screen areas
TF StageMix
User's Guide