Setup Screen - Yamaha TF5 User Manual

SETUP screen

Allows you to configure the StageMix app.
The SETUP screen is divided into the PREFERENCE, LICENSE, and ABOUT screens. You can switch between screens by tapping
the desired screen name at the bottom of the SETUP screen.
PREFERENCE screen
GENERAL area
1
Fader Delay
Allows you to adjust the amount of delay between when you adjust a control and when the adjustment is applied.
This setting helps prevent unintended fader movement.
Range: 0.00–0.50sec (0.01sec increments)
2
Cue Mode
Allows you to select the desired cue mode.
Mix Cue: Enables cue for multiple channels.
Last Cue: Enables cue for the last channel selected.
3
Enable Phantom Power Switching
Allows you to enable and disable the console's +48 phantom power feature.
When phantom power is enabled, this switch is displayed in red. When phantom power is disabled, the +48V buttons on the
INPUT screen are disabled.
4
Pre Fader Confirmation
Determines whether a confirmation message is displayed when you tap the PRE button to turn it on (i.e., when you switch
to pre-fader mode) in SENDS ON FADER mode.
5
Recall Confirmation
Determines whether a confirmation message is displayed in the SCENE screen when you recall a scene.
CH SELECT area
6
StageMix Follows Console
Determines whether the channel you select on the console is also selected in StageMix.
7
Console Follows StageMix
Determines whether the channel you select in StageMix is also selected on the console.
METERS area
8
Input Meter Point
Determines the input level metering point.
Pre HPF: After the head amp; before the HPF
Pre Fader: Before the fader
Post On: After the [ON] key
- 12 -
Screen areas
TF StageMix
User's Guide