46
C
5: C
HAPTER
ONFIGURING THE
Internet Settings
Connection Type
R
OUTER
From these pages, you can configure the settings for your DSL
connection.
The Internet Settings screen is used to configure the parameters for your
DSL connection. The information necessary to complete these screens
should be obtained from your ISP. Check with your ISP as for what type of
connection you should choose.
Figure 37 Internet Settings Screen
There are six options available for the DSL connection mode:
PPPoE — PPP over Ethernet, providing routing for multiple PCs (see
■
page
47)
PPPoA — PPP over ATM, providing routing for multiple PCs (see
■
page
49)
Bridge Mode — RFC1483 Bridged Mode, for single PCs only (see
■
page
51)
Routing Mode over ATM — RFC1483 Routed Mode, for multiple PCs
■
(see
page
52)
Dynamic/Fixed IP in 1483 Bridge Mode (for multiple PCs) (see
■
Disable — To disable the Internet connection function (see
■
Click Edit to set the detail settings.
page
53)
page
55)