Completing The Set Up; Operating Your French Door Refrigerator; Using The Control Panel - Samsung RF4287HA User Manual

5. After you turn on the refrigerator, let the ice maker
make ice for 1 to 2 days. Over that period of time,
throw out the first 1 or 2 buckets of ice the freezer
makes to ensure all impurities have been removed
from the water line.
Only connect the water line to a drinkable
water source.
If you have to repair or disassemble the water
line, cut off 1/4" of the plastic tubing to make
sure you get a snug, leak-free connection.

COMPLETING THE SET UP

Now that you have your new refrigerator installed in
place, you are ready to set up and enjoy the features
and functions of the appliance. By completing the
following steps, your refrigerator should be fully
operational.

Operating your French Door Refrigerator

USING THE CONTROL PANEL

1
2
3
10
7
( 1 ) Energy Press the Energy Saver button for better
energy efficiency.
Saver
The Energy Saver icon lights up when you
press the Energy Saver button.
The Energy Saver function is automatically
set to "ON" when power is supplied to the
refrigerator.
If condensation or water drops appear on
the doors, turn the Energy Saver mode off.
12_ operating
1. Make sure your refrigerator is in an appropriate
location with reasonable clearance between it and
the wall. Refer to installation instructions in this
manual.
2. Once the refrigerator is plugged in, make sure the
interior light comes on when you open the doors.
3. Set the Temperature control to the coldest
temperature and wait for an hour. The freezer
will get slightly chilled and the motor will run
smoothly. Reset the refrigerator and freezer to the
temperatures you want.
4. After you plug the refrigerator in, it will take a few
hours to reach the appropriate temperature. You
can store food and drinks in the refrigerator after
the temperature is sufficiently cool.
( 2 ) Power
Freeze
4
5
6
9
8
If condensation or water drops appears on
both sides of fridge door's central part, turn
the Energy Saver mode off after removing
the condensation. (See the explanation on
Energy Saver button in the USING THE
CONTROL PANEL.)
The Power Freeze function substantially
speeds up the freezer compressor, causing
the freezer to cool down rapidly to a
temperature you choose. When you press
the Power Freeze button, the Power Freeze
icon lights up.
Power Freeze is useful if you need to quick
freeze an item, to make a large quantity of
ice, or to cool the freezer rapidly if it has
warmed dramatically (for example, if the
door was left open).
To turn off Power Freeze, press the Power
Freeze button again. Power Freeze turns
off automatically after 72hours to decrease
energy consumption.
When you use this function the energy
consumption of the refrigerator will increase.
Remember to turn it off when you don't
need it and return the freezer to your original
temperature setting. If you need to freeze
large amount of food stuff, activate Power
Freeze function at least 24 hours before.